An ISO 9001:2008 certified FRP Pipes manufacturing company

ProductsFRP Pipes


Manufacturing Process

Fiber Tech Grip Pipes are manufactured by widely used helical filament winding method. Grip Pipes manufactured by filament winding method utilise continuous glass strand roving impregnated with polyester resin and helically wound on rotating mandrel at a specified winding angle. The winding process is continuous in bi-directional layers until the desired wall thickness is achieved. Grip pipes manufactured by filament winding offers better physical properties in comparison with other method so Grip Pipes manufactured with helical filament winding method will have longer services life whthout affecting the cost of supply.



Features & Advantages of FRP Pipes

CORROSION RESISTANCE Fiber Tech GRP Pipes manufactured with composite material glass fibre and polyesterresin. GRP is an inert material providing excellent resistance to corrosion, high chemical resistance and high weathering resistance.

NON-TOXICITY the filament winding manufacturing technology togather with the process of polymerisation and vaporisation enables Fiber Tech GRP Pipes to be made in exact conformity to the laws in forces, governing the construction of pipe that will have to be in contact with potable water and food stuffs.

HYDRAULIC EFFICIENCY Fiber Tech GRP Pipes with very smooth internal surface provides high "c" value to carry high flow at a very low frictional head loss and offers better pumping cost & saves electricity.

LONGER SERVICES LIFE Hydraulic design basis (HDB) of Fiber Tech GRP Pipes is such that, even after continuous service of 50 years, it will be having safety factor of 1.8 times of its pressure class. Thus, Fiber Tech GRP Pipes will have longer service life, reliability and durability with much lower life cycle cost compare to C.I., STEEL, G.I. and P.S.C. Pipes.

SURGE PRESSURE High resistance to surge pressure Fiber Tech GRP Pipes provide higher resistance surge pressure with high stiffness offering very less chance of bursting of pipe due to water hammer compare to steel and C.I. Pipes.

LIGHT WEIGHT Fiber Tech GRP Pipes have lower strength to weight ratio while in comparing with other material. it is light in weigh by 1/10 of P.S.C. 1/5 of steel and 1/8 of C.I. Thus, Fiber Tech GRP Pipes provide easy and faster installation, handling, modification and repairs.

LOW THERMAL AND ELECTRICAL CONDUCTIVITY Fiber Tech GRP Pipes have excellent thermal insulating properties and there is no need for the pipes to be insulated externally to maintain the temperature inside the pipe. Even cathodic protection is also not required for GRP Pipes.


Potable Water & Raw Water Supply

Fiber Tech FRP Pipes are ideal for the transportation of potable & raw water supply Our GRP piping system is highly suitable against conventional materials like Ductile iron, Mild steel & Cement pipes because of its non toxicity & inert properties against presence of any turbidity, migration of chemical additives, absorption of UV rays, presence of heavy metal.



Effluent & Sewage Water Supply

Fiber Tech GRP Pipes are ideal for the transportation of corrosive disposal of effluents & sewage. The smooth interior surface of GRP Pipes eases the flow of any kind of fluid. The corrosion resistance of pipe is also very much important in such applications. Light weight and long length, a high level of stiffness & simple installation are all important factor to choose Fiber Tech GRP Pipes in application like alum and ferric chloride.



Chemical & Fertilizer Plants

Fiber Tech GRP Pipes are manufactured using suitable polyester or vinyl ester thermosetting resin & fibre glass reinforcement. GRP is the construction materiel of choice for handling a wide variety of corrosive chemicals gases due to it´s resistance aggressive chemical media.

The chemical resistance together with high mechanical strength & excellent temperature resistance makes Fiber Tech GRP Piping system & ducting networks as most preferred product in many area of chemical industry.


Even at a large diameter its relative light weight makes installation easy and fast, resulting in cost saving in support construction and cost saving system installation Where complex engineering and pipe work is called, Fiber Tech prefabricated Pipe spools result in faster & cost saving system installation.

Fiber Tech GRP Piping can be installed for long term services basis in phosphoric & sulphuric acid plants for process, product and waterlines. Fiber Tech GRP Piping can be used for acid solution, alkali solutions, waste water treatment, salt solution, pollution control, raw water waste water, steam condensate, demineralized water gas lines, ducts, slurry line etc.


Desalinational Plants

Fiber Tech GRP Pipes are used to transfer highly corrosive sea water at high pressure & high temperature over long service periods. Fiber Tech GRP Pipes can be used for multistage flash evaporator, reverse osmosis plant, for steam condensate and rain water harvesting.



Offshore Oil Production

Fiber Tech GRP Pipes can be used for cooling water, product water, oil skimming, soil drain system, water purification, oil separation, fire fighting systems.



Refinery, Petrochemical & Petroleum Plant

Fiber Tech GRP Pipes an assured solution for brine condensate & sea water, fire fighting system, waste water, systems As well as cross country pipe line in refinery & petroleum plant. Fiber Tech GRP Pipes are ideal for chlorine gas from electrolytic cell also.



Power Plant

Fiber Tech GRP Pipes can be used in power plants due to it´s high pressure & temperature resistance. Fiber Tech GRP Pipes is an ideal for hot water lines, condensate & thermal water lines conveying of fresh water, hot water, waste water, cooling water (raw brackish and sea water).



Design and Engineering

Design and engineering of composite material involves specialized knowledge. Most engineers are very familiar with steel systems. Composites are more complex material requiring specialized technology and experience.

Fiber Tech offers advanced engineering technology to design GRP Pipes. Each Fiber Tech GRP Pipes are custom engineered by our in house team of engineers to take care of customer´s application, requirements and performance variables. Experienced experts monitor all aspects of design, engineering, manufacturing and quality control.

The process begins with our unique "design to technology" computer Analysis and modeling including critical variables like internal pressure, external ressure, specific gravity/density of fluid. This result in an efficient, safe and quality pipes, which precisely satisfies customer´s specifications.


Quality & Testing

With a clear focus on Quality Assurance System and with strict adherence to ASTM D 3517 (1986), ASTM D 2992 (1987), ASTM D 3681 (1994), ASTM D 3754, AWWA C 950 (1981), AWWA M-45, BS 5480 (1990), IS 12709 (1994) & IS 14402 (1996) design and testing codes, we are keen to produce the high quality GRP Pipes.

In addition to monitoring by the various authorities, all our product are subject to stringent controls during manufacturing. Apart from usual controls on raw materials and online quality check Fiber Tech GRP Pipes are tested at in house testing laboratory for longitudinal strength test, hoop tensile strength test, beam strength test, stiffness test, hydro test and Pipe soundness test.


Field Services

Fiber Tech GRP Pipes offer the advantage of easier on-site services and maintenance. Fiber Tech makes the most of this advantage by providing any time field services by dedicated team.

We are concern for the long term performance of GRP Pipe system, our highly trained customer oriented experts and technicians are able to provide right solution for easy and faster site installation.


Joint

GRP Pipe joints can be divided in two categories:


  1. Unrestrained joint, withstand hoop pressure only.
  2. Restrained joint, which can resists longitudinal force and hoop pressure.

Unrestrained Joints
coupling or socket & spigot gasket: Joint this joint is provided with grooves either on spigot or in the socket to retain an elastomeric gaskets for better water tightness.

Restrained Joints

  1. Butt & strap joint: These type of joints are permanent joints and widely used in all over the world for joining the GRP Pipeline. it consists of hardening of impregnated glass, chop standard mat, woven roving mat and tissues it is laminated according to specified thickness and width depend upon th design pressure class, thus offering the continuity in hoop and axial directions.
  2. Fixed flanged joint
  3. Stub end with steel loose flange

FRP Pipes & Fittings

We hold immense experience in manufacturing and supply of a wide range of FRP Pipes & fittings. Our wide range of FRP Pipe Fittings is manufactured from optimum quality FRP using various types of Resins like Isopthalic, Vinylester, Bisphenol and other resins.Our product range is offered at cost effective rates. It is resistant to corrosion, impact, galvanic & stray electrical currents, abrasion, heat and ultra-violet radiation. We also offer this product in customized forms as per the Specification.

Features

  • Dampens vibration
  • Higher conveying ability
  • Excellent thermal insulation
  • Seamless construction
  • Easy installation and repair
  • High strength to weight ratio
  • Lower thermal conductivity

Product Range

  • FRP Hand Laid Pipe
  • FRP U-Vents
  • FRP Elbow
  • FRP Flanges
  • FRP Manholes
  • FRP Blinds
  • FRP Tees
  • FRP Square to Round
  • FRP Pipe Reducer

Latest News

Recenet Events

Fiber Tech Composite Fiber Tech Composite+91-2827-293444

Site Credit: RudraSoftwares